Mitsubishi DY-1MU3E21-T Service Manual page 11

DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1. Fit tabs on 2 sides of M003 on ASSY-CHASSIS-B and
screw ASSY-CHASSIS-B and M003 with Ⓐ.
*After contact the end face of the C on ASSY-CHASSIS-B in end face of B on M003
as fit B and C, D and E, F and G, slide M003 direction of the ground.
(Follow the right figure)
2. Stick M007 for M003. (Follow the detail)
M007 : CUSHION-E
No. Screw Tighten torque(N・m)
Ⓐ
3X6 0.8 +0.2/-0.1
Ⓐ x 2
ASSY-CHASSIS-B
M003 : CHASSIS-F
M003 : CHASSIS-F
M007 : CUSHION-E
M007
11
Copyright (C) Mitsubishi Electric Corporation.
DY-1MU3E21-T
M007
M003
M003 M007
Your company internal use only.