Disassembling Procedures - Mitsubishi DY-1MU3E21-T Service Manual

DISASSEMBLING PROCEDURES

● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1. Stick M016 on M012. (Follow the detail.)
2. Remove the protection sheet,
and screw PCB-PANEL and M012 with Ⓔ.
3. Fit M011 to PCB-PANEL.
4. Lock connector after inserting M002 to PCB-PANEL.
(Follow the detail.)
Ⓔ x 14
No. Screw Tighten torque(N・m)
Ⓔ
2X6 0.2 +0.15/-0.04
M002 : FLAT-CABLE 18P
PCB-PANEL
M016
M016 : SHEET-LCD
13
Copyright (C) Mitsubishi Electric Corporation.
M011 : KNOB-VOL
M012 : ASSY-PANEL
M002
M002
Your company internal use only.
DY-1MU3E21-T