1.
Place the base log on the supports in the fi rebox and against the support at the fi rebox back.
2.
Locate the rear upper log on the two ceramic pins at the rear of the base log.
3.
Place the front log behind the metal strip at the front of the fi rebox.
4.
Locate the right middle log on the pin in the right hand side of the base log .
5.
Locate the left side log on the ceramic pin on the left hand side of the base log. Rest the narrow nose of this log
on the projection at the front center of the base log—ensure that the narrow nose does not rest on the burner.
6.
Locate the right side log on the pin in the front log and rest the nose of this log on the projection on the base
log —ensure that the nose does not rest on the burner.
1
24
24
Ceramic Logs Installation
Back Brick
Burner
BASE
LOG
Firebox
supports
Burner
bracket
Rest the base log
behind the burner
on its bracket flange
SIDE VIEW
1a
4
2
5
3
6