Chapter 8
Using the APEX Oscilloscope
This appendix outlines the use of the oscilloscope associated with the
APEX software.
From the TOOLS menu, page 1, use the arrow key to select the
SCOPE icon.
Press the ENTER (green key) and the following screen displays:
There should be a vertical dotted line moving across the screen. You
should also see a highlighted area below the screen. The highlighted
area tells you 4 things:
The time it takes the vertical line to cross the screen is 2 seconds
•
8-1
Thermo Fisher Scientific
Using the APEX Oscilloscope
REC 4258 Rev C