Advertisement
Operation
•
Clean the beverage container, the lid and the tap thoroughly prior to first use. Rinse
with clear water and let this drain through the tap.
•
Fill the container with the desired hot or cold beverage and put on the lid. Turn the
lid clockwise to close the container.
•
Now the insulated dispenser keeps the beverage cold or hot over several hours.
ATTENTION!
Only use the thermos flask for suitable beverages.
Do not fill any hazardous beverages into the thermos flask!
•
To extract your beverage, place a suitable vessel (cup, glass, etc.) with a maximum
height of 95 mm below the tap. You can also use cups installed in the lid of the
insulated dispenser.
•
To tap beverages, tilt the tap forwards.
Cleaning
ATTENTION!
Clean the beverage container and the tap after each use!
•
Clean the beverage container, the lid and the cups in it with warm water and a soft
cloth. In case of heavy contamination, use a mild detergent. Rinse with clear water.
To clean the tap, let the water run through it.
•
Clean the tap daily with hot water (fill it into the beverage container and let it flow out
through the tap).
•
Wipe the outside of the insulated dispenser with a soft, damp cloth.
•
If lime scale accumulated in the beverage container, remove this with a common
descalant or a water-vinegar solution. Let the solution run through the tap as well to
remove limescale on the inside of the tap.
•
Only use a soft cloth and never use any kind of rough cleaning agents or similar,
which may scratch the device.
•
After cleaning, use a soft, dry cloth for drying and polishing the surface.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 4 -
phone: +49 (0) 5258 971-0
fax:
+49 (0) 5258 971-120
Advertisement
