Front Panel - ClearView PhoenixHP Quick Start Guid

7. Put the cover in accordance
with the clip and then place the
upper cover back.

1.5 Front Panel

The front panel is shown as in Figure 1-1.
Please refer to the following sheet for front panel button information.
Name
Power
button
Shift
Up/1
Down/4
Left/2
Right/3
ESC
Enter
8. Secure the screws in the rear
panel and the side panel.
Ico
Function
n
Power button, press this button for three seconds to boot
up or shut down NVR.
Shif In textbox, click this button to switch between numeral,
t English(Small/Capitalized),donation and etc.
Activate current control, modify setup, and then move up
and down.

Increase/decrease numeral.
、

Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Shift current activated control,

When playback, click these buttons to control playback bar.

In text mode, input number 2(English character A/B/C)
/3(English character D/E/F)
.
Go to previous menu, or cancel current operation.
ES
C
When playback, click it to restore real-time monitor mode.
EN
Confirm current operation
TE
Go to default button
R
Figure 1-1
2