SATO MB400i Operator's Manual page 52

Operation and Configuration
Printer modes (cont'd)
Online Command Compatibility Mode
The printer can be set for compatibility with SBPL
commands or with the older MB400-compatible
commands.
Setting Online Command compatibility
(cover must be left open)
Compatibility
MB400-compatible
online commands
SBPL
online commands
You can check the current setting with a test printout
as described in "Performing a Test Print" on page 2.
When setting the online command compatibility
options, the STATUS LED blinks green, and turns
into a steady green signal upon completion of setting.
Turn off the printer ONLY when the STATUS LED is a
steady green light.
3-16
DSW-1 DSW-2
ON ON
ON ON
DSW-3 DSW-4
ON ON hold down PRINT
ON ON hold down FEED
Other keys
button
button