Table of Contents
Advertisement
Available languages
Available languages
continued
d) If you wish to edit the channels, press
to change to edit mode.
Press b until the mode that you wish to
edit is highlighted: Label, Skip,
symbol). Then press
1) To label, press V or v to select the
alphanumeric characters for the label.
Then press
2) To skip the program number, press
V or v to select "On". Then press
You can skip this program number
when using PROG +/–.
3) To block unwanted program number,
press V or v to select
e) Repeat step b) to d) if you wish to change
other channels.
Press WEGA GATE to go to the next menu.
4
Make sure that "Yes" is selected, then
press
to start digital quick focus.
The convergence adjustment screen appears,
and the convergence is automatically
adjusted.
After the adjustment, the last "Initial Setup"
menu appears automatically on the screen.
5
To prevent this "Initial Setup" menu from
appearing again when you turn on the
projection TV by pressing !, press V or v
to select "No", then press
To allow this menu to appear again, select
"Yes", then press
Tip
• You can immediately go to the end of the "Initial Setup" menu by pressing WEGA GATE.
Notes
• Convergence can also be adjusted manually using the menu (see page 28).
• You can also perform the Digital Quick Focus feature using
• Sound will be muted while the Digital Quick Focus feature is running.
8
Installation
(block
.
.
. Then press
.
.
Program Sorting/Edit
PROG Label
01
02
03
04
05
06
Edit mode
Select:
Program Sorting/Edit
PROG Label
01
02
03
04
05
06
.
Edit mode
Select:
Program Sorting/Edit
PROG Label
01
02
03
04
.
05
06
Edit mode
Select:
Start digital quick focus now?
Select:
Display this menu next time?
Select:
on the front panel.
Skip
Off
Off
Off
Off
Off
Confirm:
Exit:
WEGA GATE
Skip
Off
Off
Off
Off
Off
Confirm:
Exit:
WEGA GATE
Skip
Off
Off
Off
Off
Off
Confirm:
Exit:
WEGA GATE
Initial Setup
Yes
No
Confirm:
Exit:
WEGA GATE
Initial Setup
Yes
No
Confirm:
Advertisement
Chapters
Table of Contents
