Sony Wega KP-FR43 Operating Instructions Manual page 34

continued
Symptom
Abnormal color
patches
TV cannot receive
stereo broadcast
sound.
or
Stereo broadcast
sound switches on
and off or is
distorted.
Teletext display is
incomplete
(snowy picture or
double images).
The 1 (standby)
indicator on your
projection TV
flashes red several
times after every
three seconds.
The projection
TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.
Cannot play
shooting games.
Projection TV
cabinet creaks.
Static discharge is
felt when
touching the
projection TV
cabinet.
Lines moving
across the
projection TV
screen.
34
Additional Information
• Keep external speakers or other equipment away from the projection TV.
Do not move the projection TV while the projection TV is turned on.
• Check the antenna cable and connection on the projection TV, VCR and at
the wall (see page 30).
• Check the antenna setup. Contact a Sony dealer for advice.
• Check the antenna cable and connection on the projection TV, VCR and at
the wall (see page 30).
• Check the antenna setup. Contact a Sony dealer for advice.
• Display the "Channel Setup" menu and set the "Signal Booster" to "Auto"
from "Manual Program" (see page 27).
• Use the fine tuning ("Fine") function (see page 27).
• Count the number of times the 1 (standby) indicator flashes.
Press ! (main power) to turn off your projection TV. Contact your nearest
Sony service center.
• The "Signal Booster" is functioning to detect a weak signal. This does not
indicate a malfunction.
• Some shooting games which involve pointing a light beam at the
projection TV screen with an electronic gun or rifle cannot be used with
your projection TV. For details, see the instruction manual supplied with
the video game software.
• Change in room temperature sometimes make the projection TV cabinet
expand or contract, causing a noise. This does not indicate a malfunction.
• This is the same static discharge that is felt when touching metal door
handles or car doors especially when the air is dry, for example in winter.
This does not indicate a malfunction.
• Use the fine tuning ("Fine") function (see page 27).
Solutions