Changing The "Sound" Setting - Sony Wega KP-FR43 Operating Instructions Manual

x Changing the "Sound" setting
The "Sound" menu allows you to adjust the sound settings.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Sound"
icon ( ), then press
3
Press V or v to select the desired item (e.g., "Sound Mode"), then press
Select
"Sound Mode"
"Balance"
"Intelligent Volume"
"Surround"
"Center Speaker"
* You can adjust the setting to your personal preference in the "Sound Adjustment"
option only when the "Custom" mode is selected.
Adjusting the "Sound Adjustment" item under
"Custom" mode
1
Press V or v to select either "Treble", "Bass" or "BBE" (choose either "High",
"Low" or "Off"), then press
Selecting "Reset" will set your projection TV to the factory settings.
2
Press V, v, B or b to adjust the setting of your selected item, then press
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "Custom".
.
To
choose either "Dynamic", "Standard" or "Custom"*
(see page 12).
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select "On", then press
To cancel, select "Off", then press
choose either "TruSurround" (surround sound that spreads out
to the rear of a room), "Simulated" (stereo-like monaural sound)
or "Off".
use your projection TV speaker to optimise vocal enhancement.
Press V or v to select "On", then press
To cancel, select "Off", then press
.
Sound
DRC-MF: Sound Mode: Dynamic
Sound Adjustment
Balance
00
Intelligent Volume:
Off
Surround:
Off
Center Speaker:
Off
End:
Select: Confirm:
WEGA GATE
.
.
.
.
Menu Adjustment
.
.
23