Changing The "Picture" Setting - Sony Wega KP-FR43 Operating Instructions Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press WEGA GATE and select "Settings".
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "DRC-MF"), then press
Select
"DRC-MF"
"Picture Mode"
"3D-NR"
* You can adjust the setting to your personal preference in the "Picture Adjustment"
option only when the "Custom" mode is selected.
Adjusting the "Picture Adjustment" items under
"Custom" mode
1
Press V or v to select either "Picture" (contrast), "Brightness", "Color",
"Hue" (color tones), "Sharpness" or "Color Temperature" (choose either
"Cool", "Neutral" or "Warm"), then press
Selecting "Reset" will set your projection TV to the factory settings.
2
Press V,v,B or b to adjust the setting of your selected item, then press
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "Custom".
Notes
• The DRC-MF mode is not selectable when using the Program Index feature or when the
"Game Mode" or "Twin" mode is turned "On". The mode is not available for HD (high-
definition) and progressive input signals.
• "Hue" can be adjusted for the NTSC color system only.
• Reducing "Sharpness" can also reduce picture noise.
The DRC-MF logo (
Corporation.
22
Menu Adjustment
) is
.
To
choose either "DRC1250" (for high density pictures), "DRC100"
(reduce flicker on the screen) or "Progressive" (reduce jitter of
any small areas or scanning lines on the screen).
choose either "Vivid", "Standard" or "Custom"* (see page 12).
improve the picture quality of TV or video if a signal received is weak.
Press V or v to select "On", then press
To cancel, select "Off", then press
) and "DRC-MF" are trademarks of Sony
Picture
DRC-MF: DRC-MF:
Picture Mode:
Picture Adjustment
3D-NR:
Select: Confirm:
.
.
.
DRC1250
Vivid
Off
End:
WEGA GATE
.
.