Enjoying The Wega Theatre Mode With Center Speaker - Sony Wega KP-FR43 Operating Instructions Manual

x
Enjoying the WEGA Theatre Mode
with center speaker
The WEGA Theatre Mode enables you to enjoy the best picture, sound and
surround effect of a cinema from a DVD source. You can use your projection TV
speaker as the center speaker of your audio system for optimum vocal
enhancement and control its sound volume from the remote of the projection TV.
WEGA
THEATRE
WEGA
THEATRE
RETURN
1
4
7
2 +/–
OPTION
Notes
• Be sure to place your projection TV and connected Sony equipment adjacent to each other so
that you can control both the projection TV and the connected equipment by using the
projection TV's remote control at the same time (see page 18).
• The WEGA Theatre and center speaker modes are automatically cancelled when you change
the program number, video input or turn the projection TV off and on again.
• When the projection TV is in the center speaker mode, you cannot use the Twin pictures
feature, change the surround sound and the "Intelligent Volume" mode.
• Some Sony equipment might not respond properly when WEGA THEATRE button is
pressed. In this case, use the equipment's own remote control.
• To use the projection TV's speakers as the center speaker, you can also display "Center
Speaker" from "Sound" menu and select "On" (see page 23).
Setting up WEGA Theatre Mode
VIDEO
1. Connect the center speaker terminals of the
amplifier to the center speaker input terminal on
the projection TV (see page 32).
2. Select the proper video input and center speaker
A/B
mode from "WEGA Theatre Setup" menu and turn on
PROG INDEX
(main power) the connected equipment (see page 28).
3. See the table below. If the connected equipment is a
Sony audio/video equipment, you can set up the remote
WEGA
to work with the connected equipment (see page 18).
GATE
To
2 3
switch to WEGA
5 6
Theatre Mode
9
8
0
TV
adjust center
speaker volume
Press
WEGA THEATRE.
Be sure to aim the remote control
at the projection TV set and
connected equipment for about
one second after the button is
pressed. The connected equipment
turns on automatically from
standby mode and will start
playing (only for Sony audio/
video equipment).
The "Picture Mode" and "Sound
Mode" will switch automatically
to "Custom" and you can adjust
the setting to your personal
preference (see pages 22 and 23).
2 +/–.
Advanced Operations
13