Advertisement
Getting Started
• Review these instructions before beginning .
• Confirm that appropriate field wiring is installed (standard
six-conductor room sensor cables, plenum or non-plenum
as required) within the maximum wiring run length
for the individual equipment controller . The maximum
recommended length is 100 feet (30 m) .
• All wiring must comply with National Electric Code (NEC)
and local regulations .
Description
These room sensors allow users to view and adjust points in
the controller using the room sensor buttons and digital display .
www .DaikinApplied .com
Application
They work with McQuay BACnet VAV Actuator 2508021 and
2508021P10 . These devices incorporate a solid state or 10K
NTC sensing element to detect temperature . The effective
sensing and setpoint range is 55 to 95°F (13 to 35°C) . These
room sensors can be mounted on electrical boxes, stud-type
mounting brackets, or drywall . Obtain the necessary mounting
hardware and follow the appropriate mounting procedures for
the type of installation required .
Figure 1: Temperature Room Sensor
3
IM 1038 • VAV ACTUATOR ROOM SENSOR
I
ntroductIon
Advertisement
