KT&C EZHD-TVL4 User Manual page 14

User Manual of Digital Video Recorder User Manual
6MNO/PLAY
7PQRS/REC
8TUV/PTZ
9WXYZ/PREV
0/A
No. Name
1 POWER ON/OFF
2 USB Interface
3 IR Receiver
POWER
READY
STATUS
4
ALARM
HDD
Tx/Rx
5
Not used
6 DIRECTION
Enter letters "JKL";
Delete characters before cursor;
Select the checkbox and ON/OFF switch;
Start/stop record clipping in playback.
Enter numeral "6";
Enter letters "MNO";
In Playback mode, it is used for direct access to playback interface.
Enter numeral "7";
Enter letters "PQRS";
Manual record, for direct access to manual record interface; manually enable/disable record.
Enter numeral "8";
Enter letters "TUV";
Access PTZ control interface.
Enter numeral "9";
Enter letters "WXYZ";
Multi-camera display in live view;
In Playback mode or MenuPlaybackTag playback interface, this button can be used to
delete the selected tag.
Enter numeral "0";
Switch between input methods (upper and lowercase alphabet, symbols and numeric input).
In Playback mode, this button can be used to add the default tag.
Front Panel of EZHD-TRF4/8/16 DVRs
Function Description
Power on/off switch.
Connect to USB mouse or USB flash memory.
Receiver for IR remote control.
Power indicator lights in green when DVR is powered up.
Ready indicator is normally green, indicating that the DVR is functioning properly.
Indicator turns green when DVR is controlled by an IR remote control with the address from
1~254;
Indicator turns red when the SHIFT button is used;
Indicator does not light when the DVR is controlled by a keyboard or by the IR remote control
with the address of 255;
Indicator turns green when the DVR is controlled by IR remote control (with the address from
1~254) and keyboard at the same time , and the SHIFT button is not used;
Indicator turns orange : (a) when the DVR is controlled by IR remote control (with the address
from 1~254) and keyboard at the same time and the SHIFT button is used as well; (b) when
the DVR is controlled by IR remote control (with the address from 1~254) and the SHIFT
button is used.
Alarm indicator turns red when a sensor alarm is detected.
HDD indicator blinks in red when data is being read from or written to HDD.
TX/RX indictor blinks in green when network connection is functioning properly.
N/A
The DIRECTION buttons are used to navigate between different fields and items in menus.
In Playback mode, the Up and Down button is used to speed up and slow down recorded
video.
In All-day Playback mode, the Left/Right button can be used to select the recorded video for
14