KT&C EZHD-TVL4 User Manual page 131

User Manual of Digital Video Recorder User Manual

Note:
lower-case English letter and cannot end with '-'.

IF THE WAN PORT USED FOR HTTP ACCESS IS OTHER THAN 80, IT IS ESSENTIAL THAT YOU
ENTER THE ACTUAL WAN HTTP PORT INTO THE REGISTRATION DATA.

Access the Device via Web Browser or Client Software

After having successfully registered the device on the SIMPLEDDNS server, you can access your device via web
browser or Client Software with the Device Domain Name (Device Name).

Task 1: Access the Device via Web Browser

Open a web browser, and enter
Domain Name on the device or the Device Name on the SIMPLEDDNS server.

Example: http://www.simpleddns.com/nvr

Note:
9.2.10 for the mapped HTTP port number) you must enter the mapped port info into the SIMPLEDDNS setup for
the NVR so that port information is included when you are redirected from SIMPLEDDNS.COM/alias to your
NVR.
 OPTION 2: Access the devices via CMS
For CMS, in the Add Device window, select
Nickname: Edit a name for the device as you want.
Server Address: www.simpleddns.com
Device Domain Name: It refers to the Device Domain Name on the device or the Device Name on the SIMPLEDDNS
server you created.
User Name: Enter the user name of the device. By default it is admin.
Password: Enter the password of the device. By default it is 12345.
Figure 9. 10 Register the Device
The device name can only contain the lower-case English letter, numeric and '-'; and it must start with the
http://www.simpleddns.com/alias
If you mapped the HTTP port on your router and changed it to a port number other than 80, (Refer to Chapter
in the address bar. Alias refers to the Device
and then edit the device information.
131