Safety And Instructional Decals - Toro Power Max 38624 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
Reorder part no. 112-6633
1. Fast
2. Forward speeds
1. Traction drive—squeeze the lever to
engage; release the lever to disengage.
2. Warning—read the Operator's Manual.
106-4525
3. Slow
4. Reverse speeds
112-6626 (Model 38624 only)
3. Cutting/dismemberment hazard,
impeller—do not place your hand in the
chute; stop the engine before leaving
the operator's position, use the tool
clear the chute.
4. Cutting/dismemberment hazard,
impeller and auger—stay away from
moving parts, keep all guards and
shields in place; remove the ignition
key and read the instructions before
servicing or performing maintenance.
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—keep bystanders a safe
distance from the snowthrower.
Reorder part no. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; stop the engine before leaving the
operator's position, use the tool to clear the chute.
5. Thrown object hazard—keep
6. Auger/impeller drive—squeeze the
5
107-3040
112-6625
bystanders a safe distance from the
snowthrower.
lever to engage; release the lever to
disengage.