Problem
Discharge chute either does not lock into
place or does not move
Snowthrower does not properly clear the
snow off the surface
Possible Cause
7. The auger/impeller drive belt is worn
or broken.
1. The discharge chute latch is not
properly adjusted.
1. The skids and/or scraper are not
properly adjusted.
2. The pressure in the tires is not equal.
30
Corrective Action
7. Replace the auger/impeller drive belt;
refer to www.Toro.com for servicing
information or take the snowthrower to
an Authorized Service Dealer.
1. Adjust the discharge chute latch.
1. Adjust the skids and/or the scraper.
2. Check and adjust the pressure in one
or both tires.