Basic Operation; General Functions - Kenwood KDC-300RN Instruction Manual

Basic Operation

[SRC] Release
Search [DISP]
button

General functions

Power/Source select button : [SRC]
Turns on the power.
When the power is on, the source switches between
Tuner ("TUNER") , CD ("CD") , Auxiliary input ("AUX"),
and Standby ("STANDBY") each time this button is
pressed.
Press at least 1 second to turn off the power.
⁄
• When an optional accessory is connected, the source name
for each device appears (KDC-W3544W only).
Volume control : [AUD] knob
Turn the knob to adjust the volume.
Faceplate release : Release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
¤
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
4
|
KDC-W3544W/KDC-W3044/KDC-W313
[FM+] Disc slot
[AM–]
[AUD]
[ ] [ ]
knob
Display [ ]
[1] [2] [3] [4] [5] [6]
Auxiliary input
Connect a portable audio device with mini-plug cable
(3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
Muting volume upon reception of phone call
When there is a call, "CALL" is displayed and the audio
system is paused.
When the call ends, "CALL" disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output : [AM–]
Switches between ON ("SW ON") and OFF ("SW OFF")
each time this button is pressed for at least 2 seconds.
Switching display : [DISP]
Changing the information displayed. Refer to page 6
for the details of the display setting.
Auxiliary input