Panasonic SA-AK870GCP Service Manual page 67

Step 15 : Remove 1 screw.
Step 16 : Detach the Rear Panel slightly backward as arrow
shown, lift up the AC Inlet P.C.B. together with the SMPS
P.C.B..
Step 17 : Position Mechanism Unit (CR14C) according to the
diagram show.
Step 18 : Connect 6P FFC cable at connector (CN2815) on
Main P.C.B..
Step 19 : Connect 5P cable at connector (CN1113) on USB
Connector/Led P.C.B..
Step 20 : Connect 11P cable at connector (CN2802) on Main
P.C.B..
Step 21 : Connect 20P FFC cable at connector (CN2804) on
Main P.C.B..
Step 22 : Connect 22P FFC cable at connector (CN2801) on
Main P.C.B..
Step 23 : Connect 2P cable at connector (CN2820) on Main
P.C.B..
67
SA-AK870GCP