Panasonic SA-AK870GCP Service Manual page 17

Item
Mode Name Description
CR14 inspection CR14 inspection
operation:
1. Load TRAY 1 (Move
to PLAY position)
2. After that, TRAY 2 is
open (TRAY 1 still in
LOAD condition) and
close.
3. Next TRAY 3 is open
(TRAY 1 still in
LOAD condition) and
close.
4. Then TRAY 4 is
open (TRAY 1 still in
LOAD condition) and
close.
5. Finally TRAY 5 is
open (TRAY 1 still in
LOAD condition) and
close.
6. Tray 1 is unloaded.
(Move to the STOCK
position)
7. Tray 1 is loaded.
(Move to the PLAY
position)
When step 1 to 7
operates normally without
any error, FL will display
[CHGR_OK_]
7.2.3. Service Mode Table 3
Item
Mode Name Description
Self Diagnostic Checking the records for
History self-diagnostic.
Micro-P Version Checking of various
Display items and firmware
version.
Note: The micro-
processor version as
shown is an example. It
will be revise when there
is an updates.
FL Display
sequenceDisplay [
Cold Start (Reset) To activate cold start
ipon next AC power up.
FL Display
If operation without any error
If operation with error
If NG, please refer to the original service
manual of changer unit CR14C.
FL Display
(Display 1)
]
(Display 2)
17
Key Operation
Front Key
In doctor Mode:
1. Press [DISC] button on remote control.
To exit Doctor Mode, press [
main unit or remote control.
Key Operation
Front Key
In service mode:
1. Press [1] button on remote control.
To exit Service Mode, press [
main unit or remote control.
To clear history, press & hold [0] for 5 seconds
or more.
In service mode:
1. Press [2] button on remote control.
To exit Service Mode, press [
main unit or remote control.
In service mode:
1. Press [3] button on remote control.
To exit Service Mode, press [
main unit or remote control.
SA-AK870GCP
] button on
] button on
] button on
] button on