Panasonic SA-AK870GCP Service Manual page 33

Step 9 : Detach 4P connector (CN6014) at Side Bar (R) Led
P.C.B. on Panel P.C.B..
Caution Notes:
1. During assembling of the P.C.B.s, ensure that the diode
shown on Tact Switch P.C.B. are in upright position.
2. During reassembling procedures, ensure that H-Bass Knob
is seated properly.
8.11. Disassembly of USB
Connector/Led P.C.B.
• Follow the (Step 1) - (Step 6) of Item 8.3
• Follow the (Step 7) - (Step 10) of Item 8.4
• Follow the (Step 1) - (Step 6) of Item 8.8
Step 1 : Remove 2 screws.
Step 2 : Remove USB Connector/Led P.C.B..
8.12. Disassembly of Music Port
P.C.B.
• Follow the (Step 1) - (Step 6) of Item 8.3
• Follow the (Step 7) - (Step 10) of Item 8.4
• Follow the (Step 1) - (Step 6) of Item 8.8
Step 1 : Remove 2 screws.
33
SA-AK870GCP