SA-AK870GCP
7.2.4.
CD-MP3 Reading & Playing inspection
Purpose : CD-MP3 Reading & Playing test.
Below is the procedures for this mode.
Step 1 : Enter into Doctor mode. (For more information refer to section 7.1 on key operation to enter into this mode)
Step 2 : Insert CD with MP3 tracks. (Ensure correct MP3 tracks is loaded)
Step 3 : Press [5] button on remote control. Execute MP3 Disc Check (Refer Flowchart below)
Result display :
• Displayed if MP3 test OK
• Displayed if MP3 test NG
7.3.
Error code Table Display
Self-Diagnosis Function (refer Section "7.2.1 Service Mode Table 1") provides information on any problems occuring for the unit
and its respective components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and
held unless it is cleared.
The error code is automatically display after entering into self-diagnostic mode.
18