Operating Procedures / Photos
Disassemble Guide Louver and
Panel Controller
Lift the connecting rod and manually separate it
from the universal joint. Use screwdriver to
unscrew the connecting screws.
Use screwdriver to unscrew the screw beside the
receiving window. Pull forward and then lift the
receiving window cover to remove it. Push the two
clasps to remove the panel controller.
(refer to Figure 8-22 , 8-23 and 8-24)
Stepping Motor Screw
Universal Joint
Receiving Window Cover
32
Figure 8-21
Connecting Rod
Figure 8-22
Screw
Figure 8-23
Clasp
Panel
Controller
Figure 8-24