Advertisement
Operating Procedures / Photos
Disassemble Electric Box, Control Panel and Fan
Use screwdriver to screw off the two screws to remove the electric
box cover.
Use screwdriver to screw off the two screws to remove the electric
box.
Use spanner to turn and loose the nut with washer. Manually pull the
fan upward to remove it. (refer to Figure 8-4, 8-5 and 8-6)
Disassemble Motor and Evaporator
Use screwdriver to screw off the two screws beside the isolation
plate and then screw off the eight screws to remove the motor.
Use screwdriver to screw off the two screws of the connection board
of evaporator. Screw off the two screws at the tube-exit plate.
Use screwdriver to screw off the screw at the support of evaporator,
disassemble the support of evaporator, and then manually pull the
evaporator assy to remove it. (refer to Figure 8-7, 8-8 and 8-9)
25
Figure 8-4
Screw
Figure 8-5
Figure 8-6
Nut with Washer
Figure 8-7
Nut with Washer
Screw
Figure 8-9
Screw
Screw
Figure 8-8
Advertisement
