Brickcom Fixed Box Series Hardware User Manual page 28

If the camera supports the EasyLinkTM function, the following page will be displayed.
Otherwise, this page will not be shown. *If desired, click <Skip> to skip this setting.
EasyLinkTM is a unique Brickcom function which allows users to assign a unique
EasyLink name to their network camera's IP address. There is no need to configure the
router to open up ports or remember hard-to-memorize IP addresses. Users can log
onto [uniqueEasyLinkname].mybrickcom.com to view the camera's web GUI and live
view.
Enter a unique EasyLink name whose length must be between 5-32 characters.
When finished, click the arrow button to continue.
When the IP address settings have been configured, the screen will either display a
successful or failed connection message. If the connection failed, either try again or
quit the installation.
If "DHCP IP address settings" was selected, the failure page will be displayed as below:
27