Possible Fixing Points On Flat Roof - Ferroli SIS. ECOTECH 2 F 160 Installation Instructions Manual

SIS. ECOTECH 2 F

POSSIBLE FIXING POINTS ON FLAT ROOF

NOTES:
Each single adjustable support for flat roof must be secured against slipping or overturning due to the wind,
with at least two diam. 12 screws (to be chosen as required): directly to the roof structure, making sure to
seal the holes against water infiltration, or to a substructure prepared by the customer.
Example of substructure: concrete slabs, iron/cast iron plates, steel beams, concrete slabs with anchoring,
etc.
Attention: The substructure, to be prepared by the customer, must be able to take the force of the wind
on the collectors and be fixed so as not to damage the roof.
The structure of the flat roof must be able to take the overall weight of the loaded supports.NOTE: In case
of installations in particular situations, a preliminary static/structural study is advisable. To make the fixing
system more stable, the number of support kits can be increased.
RECOMMENDED FIXING POINTS IN
NORMAL LOAD CONDITIONS
SIS. ECOTECH 2 F 160
RECOMMENDED FIXING POINTS IN HIGH
X
LOAD CONDITIONS
SIS. ECOTECH 2 F 220
PROFILE DIMENSIONS
1495 (mod. 160 - 280)
1795 (mod. 220)
Code 3541B140 - 11/2011 (Rev. 00)
SIS. ECOTECH 2 F 280
1300
GB 47