Ferroli SIS. ECOTECH 2 F 160 Installation Instructions Manual page 37

SIS. ECOTECH 2 F
Assembly of frame for collector and hot water tank SIS. ECOTECH 2 F 160 - 220 (Code 072199X0 - 072200X0)
1 - Fix the profiles as shown in the figure, using the M12x250 threaded bars or the brackets for bent tiles. During
this operation, make sure to maintain parallelism between the profiles.
ATTENTION: The support frame for the collector(s) to be installed on the roof must be fixed, depending on the
type of covering, in such as way as to ensure effective anchoring.
1
A
1- Fix the profiles to the threaded bars (optional) only at the
A
2- Fit the sheet necessary for fixing the collector in the position
3- Place the collector on the structure, making sure to position
4- Also fit the second sheet; the bolts must not be tightened.
Code 3541B140 - 11/2011 (Rev. 00)
places indicated in figure A.
shown in figure C. Use the M8x45 hex. socket screws with
respective washers and nuts (fig. C-D).
Do not tighten the fixing bolts of the sheet, so as to be able
to easily insert the collector under it.
HOLE FOR
HOLE FOR
SIS. ECOTECH
SIS. ECOTECH
2 F 160
2 F 220
the sheet on the profile of the collector as shown in (fig.
E).
Make sure the collector is centred with respect to the pre-
viously fixed profiles (fig. F) and that its profile is inserted
under the sheet (fig. F2)
F2
GB 37