KYMCO UXV 450i Owner's Manual page 65

Maintenance And Lubrication
Changing the rear gear box oil
1. Place the vehicle on the a level surface.
2. Place a container under the rear gear box
to collect the used oil.
3. Remove the rear gear box oil drain bolt(1)
and rear gear box oil filler bolt (2).
4. Install the rear gear box oil drain bolt(1) and
then tighten it to the specified torque.
5. Fill the rear gear box oil with recommended oil.
6. Install the rear gear box oil filler bolt(2).
Tightening torque
Drain bolt : 5 N-m (0.5 kgf-m)
Recommended oil : SAE 80
Oil quantity : Periodic oil change
Note: UXV 450i TURF model equips rear differential same with front gear box.
(2)
0.23L
58
(2)
(1)