Comdial Executech User Manual page 23

Message 2
reached. (Used with Call Forward feature.)
To turn on message,
RESULTS: Display will prompt for message.
RESULTS: Display will show message.
RESULTS: Display will show extension number.
Whenever another Executech LCD speakerphone
is used to place an intercom call to this telephone,
the display of the calling telephone will show the
CALL message which was programmed at this
telephone.
To turn off message,
Special purpose messages may also be available
for use if they are programmed into the system
from the attendant telephone(s) (extensions 110,
111). Confer with the system attendant concerning
message availability.
23