Lpr Printing - PCI Mini-101M User Manual

Browse
2
Before upgrading the firmware, please check the current version of
the firmware first, and then download the firmware from the website.
Click Browse to search for the downloaded firmware file in your
computer, and then click OK to start upgrading.
Reboot
After uploading the firmware, you have to reboot the system to activate
the new firmware.
DO NOT cut off the power by haphazard, or the firmware
upgrade might be failed and cause the system disorder. Please DO
NOT cut off the power or close the upgrading program until the
system notify that the system upgrading successful.

5. LPR Printing

LPR Printing (Line Printer Remote technology) allows users to connect
to MFPs or printers via TCP/IP for printing sharing. The computer with
Windows 98SE/Me/NT/2000/XP/2003/Vista operating system can use the
protocol to share printing in the network. MFP Server can support LPR
printing by default.
If you install the MFP Server in Windows 98SE/Me/NT, the MFP Server
provides a tool Network Port Setup that helps to add the LPR protocol
to users'computer easily. Please refer to Chapter 10.
To configure the LPR setting in Windows 2000/XP/2003/Vista, please
follow the steps below. Note that the following procedures are running in
Windows XP, for Windows 2000/2003/Vista, the procedures are similar.
46
Mini-101M