Auto Connect List - PCI Mini-101M User Manual

2.3. Auto Connect List

To let the system automatically connect with Mini-101M whenever you
want to print a document just like using a traditional print server, you can
add the MFP onto the Auto Connect List.
If you send a printing job to the MFP while the MFP is
connecting by other user, you may be prompted that the device is
not found or the document is failed to print. It might also happen
on some MFPs or printers even though they're not connected by
any user. Please follow the message to retry to print and the MFP
will queue your printing job in your computer spooler. Mini-
101M will then print the job after the MFP is idle or disconnected.
To add the MFP to the Auto Connect List, please follow the steps below.
1.Click Add from the Auto Connect List .
Chapter2 Basic Setup & Configuration
2
19