Connect An Mfp Or A Printer26 - PCI Mini-101M User Manual

Connect
Disconnect
Add to My Favorite Add the MFP Servers that you frequently use to My
Auto Release
when idle time is
over ___ minutes
(5-255)
2.1.1. Connect an MFP or a Printer
If you have already installed the driver of the MFP or the printer which you
want to connect, Mini-101M can automatically connect with the MFP or
the printer.
If you have already turn on the MFP or the printer, but you haven't install
the driver for it, after you click Connect button on the MFP Manager
Utility page, the following pages will show and ask you to install the driver
right away.
1.The Found New Hardware Wizard window will pop up. Click
Next to continue adding a printer.
Let the MFP connect to your computer through Mini-
101M.
Disconnect the selected MFP.
Favorite List .
To avoid users occupying the MFP overtime, you can
setup auto release function. It is used to automatically
disconnect the current connection after the MFP is
idle for a speci ed period of time. By default, it is
never released.
Chapter2 Basic Setup & Configuration
2
15