Search For Mfp Servers - PCI Mini-101M User Manual

2
General Settings
Run MFP Manager
when Windows starts
Minimized when start
MFP Manager
Refresh status every
___ seconds. (5~300)
Your Contract
Information

2.4.2. Search for MFP Servers

If you want to find an MFP Server through network, you can enter the IP
Address of the MFP Server to do the remote search. The MFP Server on
the Remote MFP Server List will be added to the MFP Server List
for you to configure.
If the remote MFP Server you have searched is behind an NAT
Router, the MFP Server may not operate normally.
22
Mini-101M
E x e c u t e t h e M F P M a n a g e r
Windows starts. By default, it is disabled.
Minimized the
on the system tray when you start the
Manager . By default, it is disabled.
Setup the refresh interval for device status update.
By default, it is disabled.
Enter your contact information here. When you
connect to the MFP, your contact information will
be displayed on the right side of the MFP Manager
window for other users to contact you.
MFP Manager
w h e n e v e r
to an icon
MFP