4.3. Setup Wizard Setup
2
4.3.1. System
Click Setup Wizard on the web browser of the print server's home
page. And click System then it will show the following picture. It
allows you to configure the general system settings of this print server.
System Settings
Print Server Name You can give Mini-101M Print Server a new
name and fill the name in this blank.
Password This password is used for entering the Web configuration
page. You can type a 7 digits password. The default password is 0000.
Re-type Password To verify the password, please type the new
password again.
Save & Next After completing the system settings, please click this
button to go to the next step.
38
Mini-101M