Tcp/Ip Configuration - PCI Mini-101M User Manual

2
If you want to configure protocol, please follow the following
description to set up TCP/IP Settings for the print server. You can configure
the MFP Server to automatically get IP from DHCP server or manually
specify a static IP. You may choose Static IP or Auto IP. It is
recommended that you should assign a static IP for Mini-101M. Click
Save to apply the settings.
IP Address Assignment:
If you need the MFP Server to automatically get an IP from DHCP server,
select Auto IP . You also can select Static IP to manually assign
IP Address , Subnet Mask and Gateway for the MFP Server. By
default, Static IP is enabled and the default settings are as follows:
IP Address: 192.168.1.200
Subnet Mask: 255.255.255.0
Auto IP – The IP Address information of the MFP Server obtained from
DHCP Server will be displayed in the address field.
Static IP – Manually assign the IP address information on the same
network with your computer to the MFP Server.
28
Mini-101M