Accessories; Optional Equipment - Lincoln Electric RANGER 225 GXT 225 GXT Operator's Manual

C-1

OPTIONAL EQUIPMENT

K2635-1 SMALL TWO-WHEEL ROAD TRAILER
WITH DUO-HITCH-For heavy-duty road, off-road,
plant and yard use.
Includes pivoting jack stand, safety chains, and 13"
wheels. Overall width 60". Stiff .120" welded rectangu-
lar steel tube frame construction is phosphate etched
and powder coat painted for superior rust and corro-
sion resistance.
Low sway suspension gives outstanding stability with
manageable tongue weight. Wheels bearings are
packed with high viscosity, high pressure, low
washout Lubriplate® grease.
Features a Duo-Hitch™ - a 2" Ball/Lunette Eye combi-
nation hitch.
Order:
K2635-1 Trailer
K2639-1 Fender and Light Kit
K2640-1 Cable Rack
K1737-1 FOUR WHEEL ALL-TERRAIN UNDER-
CARRIAGE - For moving by hand at construction
sites. Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov-
ing by hand on a smooth surface. One or two gas
cylinders can be mounted on the rear of the undercar-
riage with the installation of K1745-1 Cylinder
Holder(s). Heavy duty puncture resistant pneumatic
tires and front caster.
K1745-1 WELDING GAS CYLINDER LPG TANK
HOLDER
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
K1788-1 ROLL CAGE - Gives added damage protection.
Attaches to K1737-1, K1770-1, and K957-1.
K886-2 Canvas Cover -To protect the RANGER®
225 GXT when not in use. Made from attractive red
canvas material which is flame retardant, mildew
resistant, and water repellent.
K802R Power Plug Kit - provides four 120V plugs
rated at 15 amps each and one dual voltage, Full
KVA plug rated at 120/240V, 50 amps.
K802N Power Plug Kit - Provides four 120V plugs
rated at 20 amps each and one dual voltage, full KVA
plug rated at 120/240V, 50 amps.

ACCESSORIES

K704 Accessory Kit - Includes 35 ft (10.7m) 2/0 AWG elec-
(Field Installed)
trode cable, 30 ft. (9.1m) 2/0 AWG work cable, headshield
with No. 12 filter, GC300 work clamp and Cooltong® 300
electrode holder. Cables are rated at 300 amps, 100% duty
cycle.
K875 Accessory Kit - For Stick welding. Includes
20ft.(6.1m)#6 electrode cable with lug. 15ft.(4.6m)#6 work
cable with lugs, headshield, filter plate, work clamp, elec-
trode holder and sample pack of mild steel electrode. 150
amp capacity.
K1898-1 Spark Arrester Kit - Attaches between muffler
and exhaust elbow. Virtually eliminates spark emissions.
K1690-1 GFCI RECEPTACLE KIT - Includes one UL
approved120V ground fault circuit interrupter duplex type
receptacle with cover and installation instructions.
Replaces the factory installed 120V duplex receptacle.
Each receptacle of the GFCI Duplex is rated at 20 Amps,
the maximum total current from the GFCI Duplex is limit-
ed to the 20 Amps. Two kits are required.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the
120/240V NEMA 14-50R receptacle on the case front
(which accepts 4-prong plugs) and converts it to a NEMA 6-
50R receptacle, (which accepts 3-prong plugs.)
T12153-9 Full-KVA Power Plug - One dual voltage plug
rated at 120/240V, 50 amps.
RANGER® 225 GXT
C-1