Introduction; Features; How To Use This Manual; Getting Started - Martin Audio DX0.5 User Manual

DX0.5
Correct Disposal of this product: This symbol indicates that this product should not be disposed of with your
household waste, (2002/96/EC) and your national law. This product should be handed over to an authorized
collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of
waste could have a possible negative impact on the environment and human health due to potentially
hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources. For more information about
where you can drop off your waste equipment for recycling, please contact your local city office, waste
authority, or your household waste disposal service.
Introduction
Offering sophisticated EQ, crossover, dynamics processing and system protection, the Martin Audio DX0.5 Loudspeaker
Management System provides complete system optimization for both passive and powered systems. Five different operating
modes cover a wide range of systems. Each of the six outputs feature dedicated level control, mute, polarity invert, high / low‐
pass filters, 7‐band parametric / shelving EQ, 600ms delay and limiting. Two input channels provide independent level control,
mute, 600ms delay and a flexible 5‐band parametric / shelving EQ. The convenient front‐panel control also includes 7‐segment
LED metering per channel. The DX0.5 utilizes high‐end 24‐bit AKM® AD/DA converters with 120 dB dynamic range for class‐
leading sound quality. With 24 user‐definable presets and flexible I/O for simple routing and configuration, the DX0.5 is an ultra‐
flexible processor, ideal for a wide range of portable and permanent applications.
Features

Professional 2‐input, 6‐output system processor for passive and powered Loudspeaker systems

Sophisticated, intuitive EQ, crossover, delay and dynamics processing optimizes and protects your system

High‐end 24‐bit AKM® AD/DA with 120 dB dynamic range

Two balanced XLR inputs with level control, mute, 600ms delay and 5‐band parametric / shelving EQ

Six balanced XLR outputs with level control, mute, polarity invert, dedicated high and low pass filters, 7‐band
parametric / shelving EQ, 600ms delay, and limiting

Powerful limiter on every output for ultimate protection

Convenient front‐panel controls for parameter editing and input / output muting

USB port for simple programming via PC

Linkable inputs and outputs for easy stereo configuration

7‐segment LED metering for input / output level or limiter activity

5 operating modes: 2 x stereo + sub, 3 x stereo, 2 x 2‐way + sub, 2 x 3‐way and 1 x 6‐way

24 presets for storing Martin Audio CDD or other system parameters

Switch mode power supply: 100V – 240V

Compact, single rack unit design
How to Use This Manual
After this introduction, a getting started guide will help you get things set up fast. The hook‐up diagrams show some typical
setups, while the remaining sections provide details of the DX0.5 and how to use it to optimize your loudspeaker system.
Getting Started
The following steps will help you set up your system quickly.
1. Make all initial connections with the power switches OFF on all equipment. Make sure the master volume, level, or gain
controls are all the way down.
2. Connect the line‐level outputs from your mixing console (or other signal source) to the inputs of the DX0.5 Loudspeaker
Management System
3. Connect outputs 1‐6 from the DX0.5 to the inputs of power amplifiers OR directly to the inputs of Powered loudspeakers
and/or subwoofers such as the Martin Audio DD12 or PSX.
4. If using amplifiers, connect the outputs from the power amplifier(s) to the inputs of Passive loudspeakers.
5. Turn on the mixing console (or other signal source).
6. Turn on the DX0.5 Loudspeaker Management System.
HAM09224 User Guide V1.0
USER GUIDE
7