Table of Contents
Advertisement
DX0.5
If the entered password is wrong, the splash screen will display Password
User Password splash screen without changing the password.
The password has been updated, but it is still disabled. This leads us to the fourth – and final – sub‐menu:
Enable Password
Here is where the user password is enabled. The Nav/Edit1 Control [7] moves the cursor left and right while the Edit2 [8] and
Edit3 [9] Controls change the text.
Enter the correct password and press the Enter Button [10]. Turn the Edit2 [8] or Edit3 [9] Control to scroll between Password
: Disable [default] and Password :
When enabling, a symbol resembling a padlock will appear in the lower‐right area of the LCD Display [6]. Pressing the Utility
Button [12] here returns you directly to the User Password splash screen.
When disabling, the padlock symbol disappears and the processor will return to the Security Utilities splash screen.
The password will need to be entered to make any changes once the DX0.5 has been locked and password enabled. Therefore,
make a note of the password and keep it somewhere safe. If the password is lost, you will have to perform a factory reset to
restore the unit's default settings [see page 13].
HAM09224 User Guide V1.0
USER GUIDE
Enable. If changing, press the Enter Button [10] only once here.
Wrong! and the processor will return to the
20
Advertisement
Table of Contents
