DX0.5
Delay
The final tab is delay which is where input and output delay can be added to time align either an entire system or components
within a cabinet.
At the top of the window is a selection option for how the delay is specified, either by time in milliseconds, distance in meters or
distance in feet for counties using imperial measurements;‐
The diagram then shows inputs A and B with delay adjustment available for both channels independently (unless they have been
linked);‐
Routing is shown with red (for channel A) and blue (for channel B) lines going from their respective input channels directly to the
output channels to which they have been routed;‐
HAM09224 User Guide V1.0
USER GUIDE
57