DX0.5
The top section of the window is where filters and outputs are selected;‐
Parametric filters 1 to 7 are selected using the buttons on the left followed by the high pass and low pass filters. Over to the right
are buttons 1 to 6 to select which of the output channels you are controlling. As with inputs, all outputs can be configured
completely independently unless you have used the link function to link two or more channels together. The final button is the
'Show All' which displays the response of all six channels;‐
To the right side of the window is the Property window which will look different depending on which filter or filter type is
selected, the Parametric filters 1 to 7 appear very similar to the input EQ, High and low pass look slightly different, here we see
all three;‐
HAM09224 User Guide V1.0
USER GUIDE
53