Selecting And Managing Devices; Charging The Dog Collar Device; Turning On The Devices; Turning Off The Devices - Garmin Delta XC Series Owner's Manual

The LCD display on the handheld device shows the current
battery charge level. Charging is complete when the battery
charge level icon stops flashing.

Charging the Dog Collar Device

To prevent corrosion, thoroughly dry the contacts on the collar
and the surrounding area before connecting the charging clip.
Before you put the collar on the dog, remove the charging clip. If
you do not remove the clip, it may become detached from the
collar and become lost.
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery takes about two
hours. The device does not charge when outside the
temperature range of 0° to 40°C (32° to 104°F).
1 Snap the charging clip
2
Plug the small end of the power cable into the mini-USB port
on the charging clip.
3
Plug the other end of the power cable into a power source.
The status LED is solid red when the collar is charging.
4 After the status LED turns solid green, remove the charging
clip from the collar.
NOTE: The dog collar device returns to factory default settings
each time it is charged or turned off.

Turning On the Devices

• On the handheld device, hold the power key until the
LCD display turns on.
• On the dog collar device, hold the power key until the status
LED flashes and the collar beeps.

Turning Off the Devices

• On the handheld device, hold the power key until the
LCD display turns off.
• On the dog collar device, hold the power key until the status
LED flashes and the collar beeps.

Dog Collar Devices

You can use up to three dog collar devices with a single
handheld device. You can select a different training mode and
intensity level for each dog collar device.
Each dog collar device must be paired with the handheld device
before it can be used. During the pairing process, each dog
collar device is associated with a color on the handheld device.
indicates the selected color.

Pairing a Dog Collar Device with the Handheld Device

NOTE: If your handheld device and dog collar device were
included in the same package, the devices are paired from the
factory using the black color selection.
1 Turn on the dog collar device and the handheld device.
2
NOTICE
onto the device.
2
On the handheld device, select
indicates the selected color.
3 On the handheld device, select an intensity level greater than
0 (Changing the Intensity
4
On the dog collar device, hold the power key.
You must continue to hold the power key during the pairing
process.
The device beeps once when you select the power key and
again after five seconds.
5
After the second beep, select a training key on the handheld
device.
The dog collar device turns off and beeps to indicate whether
the devices paired successfully.
Short beep Devices paired successfully
Long beep Devices did not pair
TIP: If the devices did not pair successfully, you should verify
the batteries in both devices are fully charged and the intensity
level is set higher than 0.

Selecting a Dog Collar Device

Before you can select and control a dog collar device, you must
pair the dog collar device with the handheld device
Dog Collar Device with the Handheld
Select to choose the color.
indicates the selected color.
The training keys control the dog collar device associated with
the selected color.

Managing Multiple Dog Collar Devices

You can set the maximum number of active dog collar devices
controlled by your handheld device.
1
Hold .
indicates active devices.
2
Release to select the active dog collar devices.

Dog Training

You should research and investigate the training methods best
suited for you, your dog, and your needs. This manual provides
some basic guidelines for training, but each dog has unique
training needs.
When used properly, the Delta XC training system is a very
effective training tool to aid your dog in reaching its full potential.
The use of the training system should be part of an overall
training program.
Begin training your dog on a leash, without the Delta XC training
system. You should train your dog how to heel, sit, and come to
you. After the dog understands these three basic commands,
you can begin training with the dog collar device and the leash.
Finally, when the dog consistently obeys commands using the
leash and collar, you may be able to remove the leash to train
with only the dog collar device.

Selecting and Installing the Contact Points

For best results, select the correct contact points based on your
dog's coat.
1 Select the correct contact point length for your dog's coat
type:
• For dogs with thicker coats, use the longer contact points.
• For dogs with shorter coats, use the shorter contact
points.
2
If necessary, use the included wrench to remove the contact
points.
to choose a color.
Level).
(Pairing a
Device).
Dog Training