Getting Started; Setting Up The Delta Xc System; Device Overviews; Delta Xc Handheld Device - Garmin Delta XC Series Owner's Manual

Getting Started

See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.

Setting Up the Delta XC System

Before you can use the Delta XC system, you must set up the
devices.
1
Attach the dog collar device to the collar strap
Dog Collar Device to the Collar
2
Charge the handheld device
Device).
3
Charge the dog collar device
Device).
4
Turn on the devices (Turning On the
5 If necessary, pair the dog collar device with the handheld
device (Pairing a Dog Collar Device with the Handheld
Device).

Device Overviews

Delta XC Handheld Device

Power key / BarkLimiter ™
Intensity level selection keys
Training keys
Dog collar device selection key
Training mode selection key

LCD display

LCD Display
Selected dog collar device
Stimulation intensity level
Battery charge level
Selected training mode
BarkLimiter mode (Delta Sport XC only)
Getting Started
WARNING
(Attaching the
Strap).
(Charging the Handheld
(Charging the Dog Collar
Devices).
key (Delta Sport ™ XC only)

Delta XC Dog Collar Device

Power key
Status LED
Contact points
Charging clip contacts
Attaching the Dog Collar Device to the Collar
Strap
1
With the buckle facing outward, insert the end of the collar
strap through the slot
2
Pull approximately two-thirds of the collar strap through the
slot.
3
Insert the end of the collar strap through the slot
opposite side of the device.
4
Pull the strap until it is tight across the front of the device.

Charging the Handheld Device

To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery takes about 2
hours.
NOTE: The device does not charge when it is outside the
temperature range of 0° to 40°C (32° to 104°F).
1
Lift the weather cap .
2
Plug the small end of the power cable into the mini-USB port
on the device.
3
Plug the other end of the power cable into an appropriate
power source.
on the collar device.
NOTICE
on the
1