07 Driver support
||
The car is parked deep inside a parking slot.
Blind CTA sector.
Sector where CTA can detect/"see".
07
In an angled parking slot CTA can be completely
"blind" on one side.
However, when the driver is slowly reversing
the car, the angle is changed in relation to the
*
252
Option/accessory, for more information, see Introduction.
vehicle/object that is blocking, at which the
blind sector rapidly decreases.
Examples of further limitations:
•
Dirt, ice and snow covering sensors can
reduce functionality and make it impossi-
ble to provide warnings. CTA cannot
detect hazards if it is covered.
•
CTA is deactivated when a trailer is con-
nected to the car's electrical system.
IMPORTANT
Repair of the BLIS and CTA functions'
components or repainting the bumpers
must only be performed by a workshop -
an authorised Volvo workshop is recom-
mended.
Maintenance
The sensors for the BLIS and CTA functions
are located inside the rear wing/bumper on
each corner of the car.
Keep this surface clean - also on the left-hand
side.
•
To ensure optimal functionality the areas
in front of the sensors must be kept
clean.
•
Do not affix any objects, tape or labels in
the area of the sensors.
Related information
•
BLIS* (p. 248)
•
BLIS - symbols and messages (p. 253)