07 Driver support
||
Queue assistance releases the foot brake and
sets the adaptive cruise control in standby
mode in the following situations:
•
the driver puts his/her foot on the brake
pedal
•
the parking brake is applied
•
the gear selector is moved to P, N or R
position
•
the driver sets the adaptive cruise control
in standby mode.
Automatic activation parking brake
In certain situations queue assistance applies
the parking brake in order to keep the car
remaining stationary.
This takes place if:
•
the driver opens the door or takes off
his/her seatbelt
•
ESC is changed from Normal to Sport
mode
•
Queue assistance has held the car sta-
tionary for more than 4 minutes
•
the engine is switched off
•
the brakes have overheated.
07
Related information
•
Adaptive cruise control - ACC* (p. 199)
•
Adaptive cruise control* - overview
(p. 202)
•
Adaptive cruise control* - function
(p. 200)
*
208
Option/accessory, for more information, see Introduction.
Adaptive cruise control* - switch
cruise control functionality
Changing from ACC to CC
A symbol for active cruise control is shown in
the combined instrument panel:
CC
ACC
Cruise Control
Adaptive Cruise
Control
Cruise control
Adaptive cruise control
With one press of the button the adaptive
part (spacing system) in the cruise control is
deactivated, at which point the car just fol-
lows the set/stored speed.
•
Give a long press on the steering wheel
button
- the combined instrument
panel's symbol changes from
>
By these means the standard cruise con-
trol (p. 197) CC (Cruise
Control) is activated.
WARNING
The car no longer brakes automatically
after switching from ACC to CC - it merely
follows the set speed.
Changing back from CC to ACC
Switch off cruise control with 1-2 presses on
the
button in accordance with the deacti-
vation instructions (p. 206). The next time the
system is switched on it is the Adaptive
cruise control that is activated.
Related information
•
Adaptive cruise control - ACC* (p. 199)
•
Adaptive cruise control* - overview
(p. 202)
•
Adaptive cruise control* - function
(p. 200)
to
.