Blis* - Operation - Volvo XC60 Owner's Manual

Overview
BLIS lamp location 24 .
Indicator lamp
BLIS symbol
NOTE
The lamp illuminates on the side of the car
where the system has detected the vehi-
cle. If the car is overtaken on both sides at
the same time then both lamps illuminate.
Maintenance
The sensors for the BLIS functions are
located inside the rear wing/bumper on each
corner of the car.
NOTE: The illustration is schematic - details may vary depending on car model.
24
Keep this surface clean - also on the left-hand
side.
•
To ensure optimal functionality the areas
in front of the sensors must be kept
clean.
Related information
•
BLIS* - operation (p. 249)
•
BLIS - symbols and messages (p. 253)
•
CTA* (p. 251)
07 Driver support

BLIS* - operation

BLIS (Blind Spot Information) is a function
designed for providing support for the driver
when driving in dense traffic on roads with
several lanes in the same direction.
Activate/deactivate BLIS
BLIS is activated when the engine is started.
This is confirmed by the indicator lamps in
the door panels flashing once.
Button for activating/deactivating.
The BLIS function can be deactivated/acti-
vated by pressing the BLIS button on the
centre console.
Some combinations of the selected equip-
ment leave no vacant space for a button in
the centre console - in which case the func-
tion is handled by the car's menu system MY
CAR (p. 114).
*
Option/accessory, for more information, see Introduction.
07
}}
249