Lincoln Electric POWER WAVE SVM156-A Service Manual page 103

F-57
AUXILIARY TRANSFORMER NO. 2 REMOVAL AND
REPLACEMENT PROCEDURE (CONTINUED)
REPLACEMENT PROCEDURE
1. Carefully place the transformer into the
Power Wave 455/R.
2. Install the two mounting screws that hold the
transformer to the machine base using the
3/8" nut driver.
3. Connect leads 33 and 32 to circuit breaker
CB4 and the 115 V receptacle.
4. Connect plugs P50 and P52.
5. Reposition any wire leads and install cable
ties as necessary.
6. Install the case back using the 3/8" nut driver.
7. Install the case top, sides, and input access
panel using the 3/8" nut driver.
TROUBLESHOOTING & REPAIR
POWER WAVE 455/R
F-57