Changing A Parameter; Exiting The Program Mode - Saeco Office One SUP028R Operating Instructions Manual

11.5

Changing a parameter

All editable parameters can be very easily changed.
When the page containing the value you wish to change is displayed, press
"OK".
1.2.1.
Std Temperature
Warning! When you change a machine operating parameter, you
should be aware that you are changing an operating parameter set
by the manufacturer for the purpose of ensuring optimal machine per-
formance.
The value will become editable and the " "symbol will appear beneath the digit
to be changed.
1.2.1.
Std Temperature
Press one of the two keys to change the value.
When the required value is displayed, press "OK".
1.2.1.
Std Temperature
The value will be memorised and the next digit will become available for edit-
ing.
Change the value of the next digit, if necessary, using the " " o " " key.
When the required value is displayed, press "OK".
Installation of the machine - Service Provider Manual
The value will be memorised and the next digit will become available for edit-
ing.
LANGUAGE
100
Change the value of the next digit, if necessary, using the " " o " " key.
When the required value is displayed, press "OK".
The " " symbol will disappear and the settings will take effect only when you
exit the program mode.
To quit the program mode, the following page must be displayed by pressing
"ESC".
LANGUAGE
100
When the message appears on the display, press "OK".
LANGUAGE
100
1.2.1.
Std Temperature
11.6

Exiting the program mode

3.
Exit
3.
Exit
LANGUAGE
100
LANGUAGE
LANGUAGE
• 41 •