Changing Coffee Beans - Saeco MOLTIO FOCUS HD8767 Quick Start Manual

Press the "

4
start the automatic priming by dispensing some water through
the steam wand. When the machine stops dispensing, a warm
up cycle will begin automatically.
Once heated, a 1-minute rinse/self-cleaning cycle with fresh water will begin

5
automatically. Place a container under dispensing spout to catch water.
Before using the machine for the first time a manual rinse cycle must be initialized.

6
Place container under dispensing spout. Select the pre-ground coffee brewing
function by pressing the " " button. Press the
stop. When it has stopped, repeat this operation 2 more times.
NOTE: Do not add pre ground coffee into the machine during this process.
Place a container under the steam wand and press the "

7
Press the button to start dispensing hot water through the steam wand
" "
Do this until the "no water" icon appears in display.
OPTIMIZE YOUR COFFEE
To optimize coffee extraction to compactness of the ground coffee, brew 3-5 cups of
espresso and discard BEFORE drinking.
Fill the water tank again up to the MAX level indicator.

1
 Place a cup under dispensing spout and press the
2
dispense espresso.
Repeat Step 2 three-five times.

3
 Your machine is now ready to brew coffee!
4

CHANGING COFFEE BEANS

 Turn the selector to the "
1
Caution:
It may happen that the selector can not be switched as it is
blocked by coffee beans. In this case gently move the selector
back and forth until the beans are released.
Lift the sides of the coffee bean hopper with both hands. Fill the hopper with

2
whole beans.
421946031661_MoltioFocus_HD8767_47_.indd 2
button to start the cycle. The machine will
"
button. Wait for dispensing to
" "
" button.
button to grind and
" "
position.
"
Remove any beans from the coffee bean hopper

3
compartment, then insert the hopper into the
compartment.
position.
Slide the selector switch to the

" "
4 5
COFFEE BEAN SELECTION
This function allows you to optimize the grinding for selected types of coffee beans.
Press the " " MENU button and scroll the pages by

1
pressing the " " MENU button until the following icon
is displayed.
Press the " " button or the " " button to select the type of coffee beans in

2
the coffee bean hopper. Press the " " MENU button to confirm the setting.
To exit, press the " " button. The machine is now programmed to optimize
the grinding of your coffee beans.
BREWING ESPRESSO AND COFFEE
USING WHOLE BEANS
To brew an espresso or a coffee, press the "

1
aroma. Press the " " button for an espresso or " " button for a coffee.
To brew 1 cup of espresso or coffee, press the desired button once. To brew

2
2 cups of espresso or coffee, press the desired button twice consecutively.
After the pre-brewing cycle, coffee begins to pour out of the dispensing spout.

3
Coffee brewing automatically stops when the pre-programmed level is reached;
press the " " button to stop it earlier.
USING THE STEAM WAND TO FROTH MILK
Fill a frothing pitcher 1/3 of the way with cold milk.

1
Immerse the steam wand into the milk. Press "

2
button then press the "
steam. Steam will continue to dispense for 3 minutes
or until you press the "

After each use, clean steam wand as described in the user manual.
3
" button to select the desired
"
" button to start dispensing
" button to stop dispensing.
9/10/15 3:52 PM