Illuminating The Working Area - Miele HS15 Operating Instructions Manual

^ Press the + control to select a higher
setting.
^ Press the - control to select a lower
setting.
After that, the vacuum cleaner will
switch on at the setting which was used
previously.
Vacuuming
^ When vacuuming, pull the cleaner
behind you on its wheels. You can
stand it upright for vacuuming stairs
and curtains etc.
,
When vacuuming especially fine
dust, e.g. sawdust, sand, flour,
talcum powder etc., electrostatic
charges build up naturally. Under
certain conditions these charges will
be released. To avoid the
unpleasant effects of these
discharges, a metal inlay has been
incorporated into the underside of
the handle. Please make sure that
you keep your hand in constant
contact with this metal strip during
vacuuming.

Illuminating the working area

Your vacuum cleaner is equipped with
an LED on the handle to illuminate the
area in front of the vacuum cleaner.
^ Press the I button on the LED
handle.
After approx. 30 seconds, the LED
switches off automatically.
Use
19