Replacing One Type Of Exhaust Filter With Another; Maintenance Indicator With Reset Button - Miele HS15 Operating Instructions Manual

Maintenance and care
Replacing one type of exhaust
filter with another
Do not use more than one exhaust
filter at a time.
You can replace the HEPA AirClean 50
exhaust filter fitted in the vacuum
cleaner with one of the other Miele
exhaust filters if you wish.
a AirClean
b Active AirClean 50
When replacing a HEPA AirClean 50
filter with an AirClean filter, please
note:
If you wish to replace the HEPA
AirClean 50 filter with an AirClean filter,
then it is essential that you also fit a
filter grille (see "Optional accessories").
Maintenance indicator with
reset button
The indicator lights up after approx. 50
hours of operation, which is equivalent to
about a year of average use. The level of
soiling of the dust compartment filter and
the exhaust filter must be checked at this
point.
If the filters are replaced, the indicator
must be reset. To do this the vacuum
cleaner must be switched on.
^ Press the reset button.
The maintenance indicator will go out
and reset to zero.
The indicator can only be reset by
pressing the reset button after the
light has come on. Pressing the button
at any other time will have no effect.
28